Pressure Spray Bottle

Pressure Spray Bottle

High quality industrial 1 litre pressure spray bottle with adjustable nozzle. Suitable for high speed delivery of BIKE JUICE and AVAQUA to localised areas for improved cleaning performance.


TECHNICAL DATA: Liquid Capacity: 900ml; Max working pressure: 3 bar (44 psi); Bottle material: Polyethylene; Pump material: Polyamide; O-ring seals and gasket: VITON

Spare parts are available including VITON seal kit, nozzles, and dip lances.

Parts list

OPERATION: 1) Carefully and slowly unscrew pump assembly to release pressure.  Remove assembly and then fill sprayer to maximim of 900ml; 2) Check unit is in good condition. 3) Attach and tighten pump assembly then pressurise with plunger. 4) Spray and control by using trigger lever.

SAFETY: Unit is intended to spray (not store) chemical and should be emptied after use then cleaned thoroughly. Release pressure in spray bottle after use. Lubricate O-ring from time to time with grease. Do not expose the unit to direct sunlight or heat. Built-in safety valve should be checked to ensure proper function. Use suitable protective equipment when using spray and pressure.

NOTE: This equipment is fitted with VITON seals which are resistant to a large number of solvents and chemicals including AVAQUA and BIKE JUICE but no seals are resistant to all chemicals.

CAUTION: The unit is not suitable for strong alkali or sticky liquids which leave a residue.

WARRANTY: The sprayer is guaranteed in Australia against manufacturing defects under normal conditions of use and work.